RMA Status : Check-Out

Your Shipping Address:

Name : Carl “Edd” Deckard
Email : edro0042@gmail.com
Street Address : 1329 Sheridan Ave.
City : Niles
State : Michigan
Zip Code : 49120
Country : USA
Phone : (812) 360-1764
Product To Return : MCL2003 MMax Pro 160A ESC
Problem With Product : Will not work. When powered on, leds blink red. It will connect to Smart Link. While downloading the firmware, the led turns blue as it should. However, once disconnected from Smart Link, the leds still blink red, with no audible tones.
Date Purchased : 2021-04-30
Where Purchased : Maclan-Racing.com


RMA: 2148

HAD RMA ship to address:

Service Department
14754 NE 95th St.
Redmond, WA 98052
USA

Customer Copy:

Name : Carl “Edd” Deckard
Email : edro0042@gmail.com
Street Address : 1329 Sheridan Ave.
City : Niles
State : Michigan
Zip Code : 49120
Country : USA
Phone : (812) 360-1764
Product To Return : MCL2003 MMax Pro 160A ESC
Problem With Product : Will not work. When powered on, leds blink red. It will connect to Smart Link. While downloading the firmware, the led turns blue as it should. However, once disconnected from Smart Link, the leds still blink red, with no audible tones.
Date Purchased : 2021-04-30
Where Purchased : Maclan-Racing.com


RMA: 2148

« Click here to return to the home page

User Note

7/2/2021  Check in

7/6/2021 Inspection – Tested ESC and it functions perfectly. Please see testing video. Also updated firmware and tested again, works perfectly. Please check your radio settings to make sure they are all set to factory settings when recalibrating ESC. If your throttle settings are not set to factory settings, the ESC may not calibrate and if it wont calibrate, it will not initialize and boot up. The test video provided shows the correct calibration sequence. Thank you!

7/8/2021  Check out. Ship via USPS#9400111108400035837627